Interconnection of KNX/M-bus/ModBus/BACNET networks with the byNeuron cloud services (subscription required).
Use as a logical building block and clock.
Use as line/area coupler and/or data interface.
Can optionally also be used as a gateway for the visualization software KNXVision.
Table with status of all group addresses for visualization and communication.
Coupling with the byNeuron cloud servers over TCP port.
Buffer memory in case of loss of connection with the Internet.
KNXnet/IP interface for (ETS) programming via the IP network.
BMX routing for communication between KNX lines, ranges and IP worlds, number of programmable logic functions.
Supported logical functions:
Power supply: 10-30VDC (M-bus also 230VAC version)
Power consumption: max 5VA
Environment temperature: 0-30°C
Storage temperature: -10 +70°C
Relative humidity (non-condensing): 5-80%
For mounting on DIN rail according to FN 50022-35 x 7,5
Mounting width: 4 modules (M-bus 6 modules)
Connect your existing building network directly to the cloud via LoRaWan with the byNode LoRaWan.
More information about our LoRaWan sensors here.
The M-Bus gateway connects M-Bus meters directly to the byNeuron-cloudplatform and to other Nodes, f.e. KNXNode.It uses the existing LAN Network and uploads data from different meters (electricity, heat, water, gaz and temperature) directly to the byNeuron cloudplatform.
Easy setup in just a few minutes.
The KNXNode can be used as an interface for programming KNX/EIB via IP and is compatible with ETS3 , ETS4 and ETS5. Assigning the IP address is done either manually via the free KNXClient software or automatically by a DHCP server. The KNXNode can also be used as a BacNet server-interface. Up to 3000 KNX-addresses can be converted to BacNet.
The KNXNode also possesses the full functionality of a KNX line/area coupler and offers a backbone transfer rate of 100 Mbit/sec. instead of 9.6 kbit/sec.
Up to 4000 logical, time and mathematical features are available for the automation of your project. Using the intuitive KNXVision Studio (free), also more complex functions can be easily programmed and (if necessary) subsequently readjusted. Programming logical functions is one thing, thoroughly testing another. For that you get assistance of the KNXVision Studio simulation features so you can follow every step visual, off- and online.
A selection of the more popular features:
As data logger the KNXNode stores all KNX telegrams internally and externally in combination with the byNode on the byNeuron cloud server for further analysis, which can be supplemented with relevant external data. The ETSx project information is used to build up a database automatically with relevant designations.
The biggest advantage? Usability!
No time wasted with exporting data, or need of knowledge of databases or Excel.
All you need to do is log on to the byNeuron cloud server where your personal project space is available (requires a monthly subscription).
byNeuron software components are the ideal companions for real-time monitoring, including the “run” status of the bus coupler of all components. In case you are confronted with “strange phenomena” you will find the cause in no time!
Power supply: 10-30 VDC
Power consumption: <5W
9 (bi) color status LEDs
Supports more than 4000 logical functions!