byNode cloud gateway
byNode cloud gateway
Secure gateway between your data and the cloud
The byNode is a powerful, multifunctional module, which takes care of the communication between a KNX/BMS, M-bus, ModBus or BACNET network and the cloud, using secure (SSL) MQTT messages over IP.
The byNode is compatible with the KNXNode III and is also a performant data logger.
By adding a LoRaWan byNode you can connect to the cloud via a LoRaWan network.
In combination with the byNeuron cloud platform it monitors your data, enabling easier installation and data management.
Interconnection of KNX/M-bus/ModBus/BACNET networks with the byNeuron cloud services (subscription required).
Use as a logical building block and clock.
Use as line/area coupler and/or data interface.
Can optionally also be used as a gateway for the visualization software KNXVision.
Table with status of all group addresses for visualization and communication.
Coupling with the byNeuron cloud servers over TCP port.
Buffer memory in case of loss of connection with the Internet.
KNXnet/IP interface for (ETS) programming via the IP network.
BMX routing for communication between KNX lines, ranges and IP worlds, number of programmable logic functions.
Supported logical functions:
- Binary logic (up to 31 inputs per logic gate)
- Time delay, staircase, weekly clock, year clock
- Gate (bidirectional) scene, sequence
- Hysteresis, transformer, comparator, multiplexer
- Binary filter, cyclic repeater, value memory
- Mathematical functions: addition/subtraction/multiplication/division/mini – and maximum
- TCP/UDP messages
- Filter table
- Status buscouplers in zones/lines
- Programming, servicing and total simulation via KNXClient and KNXVision Studio
Power supply: 10-30VDC (M-bus also 230VAC version)
Power consumption: max 5VA
Connections:
- KNX: via bus terminal
- Ethernet: RJ45 – 100Mbit
- Power supply: via plug-in screw
Status LEDS:
- Power/boat
- Bus online
- Bus communication
- BMX Connect
- BMX/MQTT communication
- UDP communication
- KNX Net/IP connection
- Logical error
- LAN link
Environment temperature: 0-30°C
Storage temperature: -10 +70°C
Relative humidity (non-condensing): 5-80%
For mounting on DIN rail according to FN 50022-35 x 7,5
Mounting width: 4 modules (M-bus 6 modules)
Connect your existing building network directly to the cloud via LoRaWan with the byNode LoRaWan.
More information about our LoRaWan sensors here.
The M-Bus gateway connects M-Bus meters directly to the byNeuron-cloudplatform and to other Nodes, f.e. KNXNode.It uses the existing LAN Network and uploads data from different meters (electricity, heat, water, gaz and temperature) directly to the byNeuron cloudplatform.
Easy setup in just a few minutes.
Product features:
- M-Bus master gateway to byNeuron-cloud and KNXNode, byNode type BACnet, …
- Operating voltage: 230VAC or 24VDC, following type
- Integrated level converter for up to 10 M-Bus devices (type 230VAC) or 20 M-Bus devices (external 24VDC)
- Supports all M-Bus meters according EN13757-2,3 (former EN1434-3)
- Direct (secured) connection to the byNeuron-cloud
- Discovery mode devices for easy configuration with PC or tablet, free client software
- Integrated datalogger for 10.000 telegrams
- Automatic synchronization after connection failure
- Modbus TCP/IP ready
KNXNode BUS/LAN controller
KNXNode BUS/LAN Controller
Reliable technology combining 4 functions in 1 module!
The KNXNode III is a powerful, multifunctional KNX module, which combines several KNX functions. The KNXNode is also a BacNet server-interface.
The KNXNode is backwards compatible with its predecessors EibNode, KNXNode and KNXNode II. Known as one of the most performant KNX controllers on the market, its potential is now fully used thanks to the integration with the other components of byNubian.
You can download the KNXNode brochure here.
The KNXNode can be used as an interface for programming KNX/EIB via IP and is compatible with ETS3 , ETS4 and ETS5. Assigning the IP address is done either manually via the free KNXClient software or automatically by a DHCP server. The KNXNode can also be used as a BacNet server-interface. Up to 3000 KNX-addresses can be converted to BacNet.
The KNXNode also possesses the full functionality of a KNX line/area coupler and offers a backbone transfer rate of 100 Mbit/sec. instead of 9.6 kbit/sec.
Up to 4000 logical, time and mathematical features are available for the automation of your project. Using the intuitive KNXVision Studio (free), also more complex functions can be easily programmed and (if necessary) subsequently readjusted. Programming logical functions is one thing, thoroughly testing another. For that you get assistance of the KNXVision Studio simulation features so you can follow every step visual, off- and online.
A selection of the more popular features:
- Binary logic (up to 32 inputs per logic gate )
- Delay/stair/clock
- Gate/scene/sequence
- Mathematical/hysteresis/transformer
- Email/MQTT (IoT protocol )
- TCP/UDP messages
As data logger the KNXNode stores all KNX telegrams internally and externally in combination with the byNode on the byNeuron cloud server for further analysis, which can be supplemented with relevant external data. The ETSx project information is used to build up a database automatically with relevant designations.
The biggest advantage? Usability!
No time wasted with exporting data, or need of knowledge of databases or Excel.
All you need to do is log on to the byNeuron cloud server where your personal project space is available (requires a monthly subscription).
byNeuron software components are the ideal companions for real-time monitoring, including the “run” status of the bus coupler of all components. In case you are confronted with “strange phenomena” you will find the cause in no time!
Power supply: 10-30 VDC
Power consumption: <5W
9 (bi) color status LEDs
Connections:
- KNX Bus Connector
- Power supply: screw connector
Supports more than 4000 logical functions!
This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.
OKLearn moreCookie and Privacy Settings
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds: